Home
Projects
Education
Publications
News
Conferences
Links
In Collaboration With
|
|
|
|
2009-07-06 16:29:102007-03-30, Tiffany Davis received 2007 NSF Graduate Research Fellowship Award
Tiffany Davis, a graduate student at the Department of Mechanical Engineering of Northwestern University, was awarded a 2007 NSF Graduate Research Fellowship. The Fellowship recognizes and supports outstanding graduate students in the relevant science, technology, engineering, and mathematics (STEM) disciplines who are pursuing research-based master’s and doctoral degrees. NSF Fellows are expected to become knowledge experts who can contribute significantly to research, teaching, and innovations in science and engineering. Tiffany is currently working with Profs. Cao, Ehmann and Wang to invest the size effect and process effects in surface texturing.2007-03-01, Prof. Brad Kinsey receives NSF CAREER Award
Prof. Kinsey from UNH received a NSF CAREER Award grant for his project entitled "Development of Hyperplastic and Superplastic Microforming Processes and Related Educational Activities" (CMII-0644705). This work will include collaborating with Prof. Kapoor from UIUC to develop microfactory versions of the processes and Prof. Dohda from Nagoya Institute of Technology to investigate superplastic rolling.2007-02-18, Prof. Jian Cao - Fellow of ASME
Prof. Jian Cao has been elected a Fellow of ASME (American Society of Mechanical Engineers). The Fellow grade recognizes exceptional engineering achievements and contributions to the engineering profession.
|
|
|
|
Recent Publications
|
View All Publication
|
Sunal Parasiz, Brad Kinsey, Neil Krishnan, Jian Cao and Ming Li, "Investigation of Deformation Size Effects during Microextrusion", Journal of Manufacturing Science and Engineering, in press, 2007
| |
| Mori, L., Krishnan, N., Cao, J., and Espinosa, H., "Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 2 - Size effect dynamic friction for brass-steel pairs", accepted to ASME J. Manufacturing Research and Engineering, 2007
| |
| Onyanka, R., Kinsey, B. L., Krishnan, N., and Cao, J., "Development of an Accurate Process Model for Microscale Forward Extrusion", Transaction of the North American Manufacturing Research Institution of SME, 2007
| |
| Honegger, A. E., Langstaff, G. Q., Phillip, A. G., VanRavenswaay, T. D., Kapoor, S. G. and DeVor, R., "Development of an automated microfactory: Part 2 - experimentation and analysis", Transactions of NAMRI/SME, vol. 34, pp.341-348, 2006 Full Paper
| |
| Honegger, A. E., Langstaff, G. Q., Phillip, A. G., VanRavenswaay, T. D., Kapoor, S. G. and DeVor, R., "Development of an automated microfactory: Part 1 - microfactory architecture and sub-systems development", Transactions of NAMRI/SME, vol. 34, pp. 333-340, 2006 Full Paper
| |
| Honegger, A., Kapoor, S. G. and DeVor, R. E., "A hybrid methodology for kinematic calibration of micro/meso-scale machine tools (mMTs)", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 513-522, 2006 Full Paper
| |
| Jun, M. B. G., DeVor, R. E. and Kapoor, S. G., "Investigation of the dynamics of micro-end milling, part 2: Model validation and interpretation", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 901-912, 2006 Full Paper
| |
| Jun, M. B. G., Liu, X., DeVor, R. E. and Kapoor, S. G., "Investigation of the dynamics of micro-end milling, part 1: Model development", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 893-900, 2006 Full Paper
| |
| Liu, X., DeVor, R. E. and Kapoor, S. G., 2006, "An analytical model for the prediction of minimum chip thickness in micromachining", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 474-481, 2006 Full Paper
| |
| Krishnan, N., Cao, J. and Dohda K., "Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 1 - Micro-Extrusion Experiments and Analysis", accepted to ASME J. Manufacturing Science and Engineering, 2006 Abstract
| |
|
Sunal Parasiz, Brad Kinsey, Neil Krishnan, Jian Cao and Ming Li, "Investigation of Deformation Size Effects during Microextrusion", Journal of Manufacturing Science and Engineering, in press, 2007
| |
| Mori, L., Krishnan, N., Cao, J., and Espinosa, H., "Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 2 - Size effect dynamic friction for brass-steel pairs", accepted to ASME J. Manufacturing Research and Engineering, 2007
| |
| Onyanka, R., Kinsey, B. L., Krishnan, N., and Cao, J., "Development of an Accurate Process Model for Microscale Forward Extrusion", Transaction of the North American Manufacturing Research Institution of SME, 2007
| |
| Honegger, A. E., Langstaff, G. Q., Phillip, A. G., VanRavenswaay, T. D., Kapoor, S. G. and DeVor, R., "Development of an automated microfactory: Part 2 - experimentation and analysis", Transactions of NAMRI/SME, vol. 34, pp.341-348, 2006 Full Paper
| |
| Honegger, A. E., Langstaff, G. Q., Phillip, A. G., VanRavenswaay, T. D., Kapoor, S. G. and DeVor, R., "Development of an automated microfactory: Part 1 - microfactory architecture and sub-systems development", Transactions of NAMRI/SME, vol. 34, pp. 333-340, 2006 Full Paper
| |
| Honegger, A., Kapoor, S. G. and DeVor, R. E., "A hybrid methodology for kinematic calibration of micro/meso-scale machine tools (mMTs)", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 513-522, 2006 Full Paper
| |
| Jun, M. B. G., DeVor, R. E. and Kapoor, S. G., "Investigation of the dynamics of micro-end milling, part 2: Model validation and interpretation", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 901-912, 2006 Full Paper
| |
| Jun, M. B. G., Liu, X., DeVor, R. E. and Kapoor, S. G., "Investigation of the dynamics of micro-end milling, part 1: Model development", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 893-900, 2006 Full Paper
| |
| Liu, X., DeVor, R. E. and Kapoor, S. G., 2006, "An analytical model for the prediction of minimum chip thickness in micromachining", Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 128, pp. 474-481, 2006 Full Paper
| |
| Krishnan, N., Cao, J. and Dohda K., "Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 1 - Micro-Extrusion Experiments and Analysis", accepted to ASME J. Manufacturing Science and Engineering, 2006 Abstract
| |
|
|
|
|
|
|
|
|
